BMS-H51C V2

  • Sale
  • Regular price $89.99


0 In Stock Special Order

8.4V@61.5kg/854.2oz
8.4V@0.09sec
( Including 1 piece of Lockable Aluminum Arm )

Application / Suitable

Priority for 3D Airplane, Jet & 1/5、1/8th Buggy, Truggy, Monster / Crawler / Off-road Car.
 
Torque At 6.0V 42.2 kg-cm / 586.2 oz-in
Torque At 7.4V 50.1 kg-cm / 695.9 oz-in
Torque At 8.4V 54.2 kg-cm / 752.8 oz-in
Speed At 6.0V 0.13 sec / 60°
Speed At 7.4V 0.11 sec / 60°
Speed At 8.4V 0.09 sec / 60°
 
Soft Start Protection A soft start to a neutral position.
Over Voltage Protection Over 9.0V drive the protection mode and 8.4V return to normal mode.
Low Voltage Protection Lower than 4.0V, drive the protection mode and 4.5V return to normal mode.
Locked Rotor Protection Stall in 5 sec, output torque goes down.
Temperature Protection Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees Freturn to normal mode.
 
Operating Voltage Range 4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S Li-Poly / 2S Li-Fe)
 
Control System Digital Controller / AD 12-Bits Resolution ( 4096 Steps )
Frequency:333Hz / Neutral:1520us
Dead Band Width 0.001ms ( Default:1us)
 
Ball Bearing Dual, Steel
Gear All Steel Alloy Metal Helical Gears
Outside Case Full One-Piece Aluminum CNC Casing
Motor High-Efficiency Japan Coreless Motor
Horn / Gear Spline 25 Teeth ( Same as F-Type )
 
Dimension (mm) 40.5 x 21 x 38.5 mm / 1.59 x 0.83 x 1.52 in
Weight (gram) 83.0 ± 1 grams / 2.93 oz
Product Picture / Dimension Sketch
 
M 502116