- Description
- Application / Suitable
- Electrical Specification (Function Of The Performance)
- Protection Mechanism
- Power Supply
- Control Specification
- Mechanical Specifications
- Physical Specifications
4 In Stock
8.4V@10.6 kg / 147.2 oz
8.4V@0.09 sec
( Including Aluminum Arm * 1 piece )
| Priority for Large Glider, Sailplane-F3J, F3B, F3F, F5J. |
| Torque At 6.0V | 8.1 kg-cm / 112.3 oz-in |
| Torque At 7.4V | 9.3 kg-cm / 129.2 oz-in |
| Torque At 8.4V | 10.6 kg-cm / 147.2 oz-in |
| Speed At 6.0V | 0.13 sec / 60° |
| Speed At 7.4V | 0.10 sec / 60° |
| Speed At 8.4V | 0.09 sec / 60° |
| Soft Start Protection | Soft start to a neutral position. |
| Over Voltage Protection | Over 9.0V drive the protection mode and 8.4V return to normal mode. |
| Low Voltage Protection | Lower than 4.0V, drive the protection mode and 4.5V return to normal mode. |
| Locked Rotor Protection | Stall in 5 sec, output torque goes down. |
| Temperature Protection | Overheat 85 degrees C (185 degrees F), drive the protection mode and down 75 degrees C (167 degrees F) return to normal mode. |
| Operating Voltage Range | 4.5V ~ 8.5V ( 4 ~ 6 Cell Ni-MH or 2S HV Li-Poly / 2S Li-Fe) |
| Control System |
Digital Controller / AD 12-Bits Resolution ( 4096 Steps ) Frequency：Up to 333Hz / Neutral：1500us or 1520us |
| Dead Band Width | 0.001ms ( Default：1us) |
| Potentiometer (Variable Resistor) | Magnetic Sensored 【Non - Contact】 |
| Ball Bearing | Triple Ball Bearings |
| Gear | All Metal Gears |
| Outside Case | Full One-Piece Aluminum CNC Casing |
| Motor | High-Premium Coreless Motor |
| Horn / Gear Spline | 25 Teeth ( Same as F-Type ) |
| Dimension (mm) | 29 x 10 x 31 mm / 1.14 x 0.39 x 1.22 in |
| Weight (gram) | 22.5 ± 0.5 grams / 0.79 oz |
| Product Picture / Dimension Sketch | (1).png) |